How to Use Xiaomi Humidifier | Ultimate Setup, Maintenance & Troubleshooting Guide for 2024
Do you find your home environment dry and uncomfortable, especially during the winter months? If so, a Xiaomi humidifier might be the perfect solution for you.
These popular devices help improve air quality by adding moisture to the air, creating a more comfortable and breathable atmosphere.
This guide will equip you with everything you need to know about using your Xiaomi humidifier effectively in 2024.
We'll cover the essential steps for setting up your device, maintaining it for optimal performance, and troubleshooting any common issues you might encounter.
Related: How to Use a Xiaomi Repeater
How to use Xiaomi Humidifier?
To begin using your Xiaomi Humidifier, start with the installation process. First, remove the water tank lid and fill the tank up to the indicated maximum water level.
Make sure to position the humidifier on a stable, flat surface, and it's recommended to use clean tap or distilled water for optimal performance.
Once powered on, the device will enter its standby mode, signified by a blinking Wi-Fi indicator. The humidifier boasts three distinct speed modes: low, medium, and high. You can easily cycle between these modes with a quick press of the on/off button.
For those desiring a consistent humidity level, there's also a constant humidity mode that aims to maintain the environment at approximately 60% humidity. To switch off the device, a prolonged press of the on/off button for three seconds will do the trick.
If you wish to control the humidifier remotely, it offers Wi-Fi connectivity. Activate this by pressing and holding the Wi-Fi button until it blinks, then sync it with the Mi Home app on your smartphone.
As a final note, should the water in your humidifier deplete, the device will alert you with three beeps and transition to standby mode, accompanied by a red LED indicator. Always remember to unplug the device before refilling to ensure safety.
How does Xiaomi Humidifier Work?
Here's a breakdown on how the Xiaomi humidifier works;
- You start by filling the humidifier's water tank with clean water. It's important to use clean water to avoid the growth of bacteria and mold.
- Once turned on, the humidifier uses an ultrasonic transducer. This is a special component that converts electricity into high-frequency sound waves. These sound waves are too high-pitched for us to hear.
- The sound waves travel through the water in the tank, causing the water molecules to vibrate rapidly. This vibration breaks the water down into very tiny particles, creating a cool mist.
- A small fan inside the humidifier blows the cool mist out of the device and into the air. This mist helps to increase the moisture level in the room.
Some Xiaomi humidifier models come with additional features, such as:
- Adjustable mist settings: This allows you to control the amount of mist that is released.
- Humidistat: This sensor automatically monitors the humidity level in the room and adjusts the mist output accordingly.
- Antibacterial technology: This helps to kill bacteria and mold in the water tank.
What are the benefits of using the Xiaomi Humidifier?
A key strength of the Xiaomi Humidifier is its ability to tailor the humidity output through adjustable settings, with certain models even featuring timers and ambient lights.
By implementing this humidifier, especially in arid conditions or during the parched winter season, users can enrich their indoor air quality considerably.
Among the myriad advantages of the Xiaomi Humidifier are the alleviation of dry skin and respiratory issues, an inherent ability to curb the proliferation of microbes, enhancement of overall air comfort, and fostering improved sleep quality due to the more moistened environment.
Product Overview - Xiaomi Humidifier
- Water Tank Lid
- Mist Outlet
- Water Tank
- UV Light Cover
- Air Outlet
- Base
- On/Off & Mode Button
- Air Inlet
- Silicone Base
- Power Cord
- Wi-Fi Button
- Wi-Fi Indicator
- Vaporizer
- Water Conduits
- UV Light
Features of Xiaomi Humidifier
- Clean, minimalistic design with excellent build quality.
- Easy and safe to use.
- Multiple modes for different conditions.
- Smart connectivity via Wi-Fi.
- Mist adjustment and UV sterilization.
Xiaomi Humidifier Specifications
| Name | Mi Smart Antibacterial Humidifier |
| Model | ZNJSQ01DEM |
| Item Dimensions | 190 × 190 × 353 mm |
| Materials | ABS, PC & PA |
| Net Weight | 1.9 kg |
| Rated Input | 25 W |
| Rated Voltage | 220-240 V |
| Rated Frequency | 50/60 Hz |
| Working Frequency | 2412-2472 MHz |
| Water Tank Capacity | 4.5 L |
| Wireless Connectivity | Wi-Fi IEEE 802.11 b/g/n 2.4 GHz |
| RF Specification | 2.4 G Wi-Fi |
| Maximum Output Power | <20 dBm |
| Noise Emission | ≤38 dB |
| Max. Humidifying Capacity | 300 mL/h |
How to Install Xiaomi Humidifier?
Before you learn how to use Xiaomi Humidifier, you should install it. Follow these instructions to install your Xiaomi Humidifier.
First, remove the water tank lid. Now, pour water until it reaches the maximum water level mark. Keep the water tank back into the base. You can now start using the humidifier.
Make sure that you place the Xiaomi Humidifier on a level surface. Add clean tap water or distilled water, and do not exceed the maximum water level mark.
How to Use the Xiaomi Humidifier?
Once you have installed the Xiaomi Humidifier, check if the operating voltage matches your power outlet before plugging it in.
When you power on the Xiaomi Humidifier, it will beep once and then enter standby mode. The Wi-Fi indication will blink when in standby mode.
You can now adjust the speed of the humidifier. The Xiaomi Humidifier comes with 3-speed modes. By default, the speed is at the lowest as you will see that only ¼ of the circular LED indicator is lit up.
To adjust speed, just press the on/off button. You get low (¼), medium (2/4), and high (¾), just press the on/off button to switch between modes.
When you press the button a 4th time, it will switch to constant humidity mode with all 4 indications lit up. In this mode, the humidifier will maintain a constant humidity level of approximately 60%.
To turn off the humidifier, press and hold the on/off button for three seconds. The humidifier will remember the last mode and will switch to it automatically when you power it on again.
The Xiaomi Humidifier allows you to connect to it using Wi-Fi so that you can control it from your phone or smart home network. To connect using WiFi, press and hold the Wi-Fi button until the indicator starts blinking. Now you can pair your phone using the Mi Home app and control using the same.
To control the LED indicators on the Xiaomi Humidifier, press the Wi-Fi button, and you will hear a beep. Then, all the indicator lights, circular LED indicator, Wi-Fi indicator, and water tank light will turn on/off.
To control the sounds of the humidifier, you need to use the Mi Home app.
And finally, if the humidifier is empty, then the device will beep three times. After this, the humidifier will switch to standby mode and the circular LED indicator will turn red. Refill the device with water to continue using it.
Make sure, the humidifier is unplugged when you refill it.
Here is the official manual guide for Xiaomi Humidifier.
How to Care And Maintain Xiaomi Humidifier?
Regular care and maintenance of the Xiaomi Humidifier ensure optimal performance. Check out how to clean and maintain your Xiaomi Humidifier.
- Dirt and dust build-up should be cleaned or else your humidifier won't work well. So make sure you check the insides of your Xiaomi Humidifier every week and clean it if necessary.
- Make sure the Humidifier is unplugged before you clean it.
- Use a clean soft cloth to clean water conduits.
- Xiaomi recommends cleaning the water pipes and conduits once a week. If you see limescale in the tubes or in the vessel, then pour mild citric acid to dissolve it. You can also use cotton swabs or soft brushes to remove limescale. Use water to rinse after cleaning.
Precautions to follow with the Xiaomi Humidifier?
When Moving it
First, turn off and unplug the Xiaomi Humidifier before moving it. Also, empty the water tank of the Xiaomi Humidifier before moving it.
During Installation
Carefully install the Xiaomi Humidifier using the instructions. Do not plug or power on the humidifier if it is not installed properly. Installation doesn't require disassembly.
Placing Humidifier
Make sure the Xiaomi Hunidifer is placed on a flat surface with no inclination. Don’t place the humidifier on wooden surfaces to avoid moisture damage to the wood.
Place the humidifier away from other appliances and furniture if you feature moisture damage. And, place the humidifier away from heat sources and direct sunlight.
Make sure the air outlet area is dry. If there is water on the base of the humidifier, wipe it off with a dry cloth. This is important to prevent damage to the humidifier.
Water Tank
Do not add hot water to the humidifier. Make sure the water temperature is under 40°C when you pour it into the humidifier. Pouring hot water can damage the humidifier.
Unplug the humidifier before cleaning or adding water. Don't add water using the air outlet or mist outlet.
Usage Restrictions
Do not use the humidifier in the following circumstances to prevent electric shocks, fire, or other damage. Always place the humidifier on a level surface so the water level reading may be correct and the water tank won't overflow.
The voltage of the power outlet must be the same as the voltage of this humidifier. Do not use the humidifier if the voltages do not match and contact your dealer. Only use the humidifier in normal room temperatures (5°C to 40°C).
What to Do if Xiaomi Humidifier Stops Working?
1. Examine the Power Connection:
Start with the basics. Ensure your humidifier is correctly connected to a functional power outlet. Once connected, make sure you've switched it on. A simple oversight here can sometimes be the root cause of the issue.
2. Assess the Water Level:
Your Xiaomi humidifier requires an adequate amount of water to operate correctly. Check the water tank to ensure that it has enough water, making sure it's above the minimum water level, usually indicated by a distinct line or mark on the tank.
3. Prioritize Regular Cleaning:
Over time, dirt, minerals, and other residues can accumulate inside your humidifier. Such build-up might obstruct the device's functionality. Hence, it's crucial to clean your humidifier at regular intervals. For a comprehensive cleaning guide, refer to the user manual provided with your device. It typically offers step-by-step cleaning instructions specific to your model.
4. Reset Your Humidifier:
In some cases, the system might need a fresh start. If your humidifier isn't responding after the above steps, consider resetting it. First, unplug it from the power source and patiently wait for around 30 seconds. Afterwards, plug it back in and switch it on to see if it resumes its operation.
Additional Troubleshooting Tips:
-
Water Quality Matters:
Using tap water might not be the best choice for your humidifier. It often contains minerals that can lead to build-up, reducing the device's efficiency and potentially leading to clogs. Instead, opt for distilled or filtered water to ensure smooth operation. -
Avoid Overfilling:
It's essential to provide enough water for your humidifier, but be wary of overfilling. If the water exceeds the recommended level, there's a risk of overflowing, which can create a mess and potentially damage the device. -
Establish a Cleaning Routine:
To ensure your humidifier functions efficiently for longer periods, establish a routine to empty and clean it. By doing so, you can significantly reduce the risk of clogs or any other performance-related issues.
How to use Xiaomi Humidifier - Conclusion
Xiaomi Humidifier is an excellent way to moisturize the air in your home and in turn moisturize your skin. It is a must-have in dry regions where humidity and rainfall are low.
In this guide, we have explained how a Xiaomi humidifier works, how to use it, what are some precautions you need to follow, and more. We hope this guide on How to use Xiaomi Humidifier was helpful.
Also Read: