Ready to say goodbye to razor burn and hello to a smooth, irritation-free shave? The Xiaomi Enchen Blackstone 3 delivers just that.

This guide will take you through how to set up and use a Xiaomi Enchen Blackstone 3. We'll even provide tips on how to achieve a perfectly smooth shave.

Let's dive in and learn how to master your Xiaomi Enchen Blackstone 3.

Also Read: 50+ Best Xiaomi Products you MUST own in 2024 | Latest Xiaomi Gadgets

How to Set Up and Use a Xiaomi Enchen Blackstone 3

How to Setup and use the Xiaomi Enchen Blackstone 3

Here is a step-by-step guide on how to use your Xiaomi Enchen Blackstone 3:

Step 1: Charge the Razor

The first step in using your Xiaomi Enchen Blackstone 3 is to ensure that it is fully charged. The razor comes with a USB cable that can be connected to any USB port or charging adapter. It takes about 90 minutes to fully charge the razor, and a full charge can provide up to 90 minutes of continuous shaving time.

Step 2: Attach the Head Assembly

After the razor is fully charged, attach the head assembly back onto the razor. The head assembly should be securely attached and locked in place. This is an important step as it ensures that the razor operates at maximum efficiency.

Step 3: Turn on the Razor

To turn on the razor, press and hold the power button for a few seconds until the LED indicator lights up. The Xiaomi Enchen Blackstone 3 has two modes of operation – normal mode and turbo mode. You can switch between the two modes by pressing the power button once.

Step 4: Start Shaving

Once the razor is turned on and the head assembly is securely attached, you can start shaving. Place the razor against your skin at a 90-degree angle and move it slowly in the direction of hair growth. It is important to use light pressure while shaving, as excessive pressure can cause skin irritation or cuts.

If you are using the normal mode, move the razor in a slow and steady motion to achieve a close and smooth shave. If you are using the turbo mode, make sure to use light and gentle strokes to prevent any accidental nicks or cuts.

Step 5: Rinse and Clean the Razor

After you have finished shaving, rinse the razor head assembly under running water to remove any hair or debris. Make sure to clean the razor thoroughly to prevent the buildup of dirt and bacteria. You can use a small brush (usually provided with the razor) to brush away any hair, dust or debris from the blades and other parts of the assembly.

Step 6: Dry the Razor

After rinsing the razor head assembly, shake off any excess water and pat it dry with a clean towel. Make sure that all parts are completely dry before reattaching the head assembly to the razor. You can also use a soft cloth or a cotton swab to wipe away any dust or dirt that may have accumulated on the surface of the razor.

Step 7: Store the Razor

Finally, store the razor in a dry and cool place to ensure that it is protected from moisture and dust. You can use the provided protective cap to cover the head assembly and protect the blades from damage.

How to Clean the Xiaomi Enchen Blackstone 3

Here are the steps you should follow to clean your electric razor:

Step 1: Turn off the Razor

Before starting to clean your electric razor, make sure that it is turned off. This is an important safety precaution that you should always follow when dealing with any electronic device.

Step 2: Remove the Head Assembly

The next step is to remove the head assembly from the razor. Depending on the model, this may involve pressing a release button or twisting the head assembly to unlock it. Consult your razor's user manual for specific instructions.

Step 3: Brush the Head Assembly

Once you have removed the head assembly, use a small brush (usually provided with the razor) to brush away any hair, dust or debris from the blades and other parts of the assembly. You can also use a toothbrush or any other small brush that can reach into tight spaces.

Step 4: Rinse the Head Assembly

After brushing away any debris, rinse the head assembly thoroughly with water. You can use warm water for this step, but avoid using hot water as it can damage the blades or other components of the razor. Make sure that the water does not get into the body of the razor.

Step 5: Dry the Head Assembly

After rinsing the head assembly, shake off any excess water and pat it dry with a clean towel. Make sure that all parts are completely dry before reattaching the head assembly to the razor.

Step 6: Clean the Body of the Razor

To clean the body of the razor, use a soft cloth or a cotton swab to wipe away any dust or dirt that may have accumulated on the surface. You can also use a mild soap solution to clean the body of the razor, but avoid getting water inside the razor as this can cause damage.

Highlights of the Xiaomi ENCHEN Blackstone 3D Electric Shaver

3D Self sharpening blades - The ENCHEEN Blackstone 3D runs on 3 foil self sharpening blades that have their own flex axis allowing smoother and safer shaves

Two-in-One - The Blackstone 3D does not have just one shaving head, but two. The one on the side is ideal for beards and can be opened by pressing the switch beneath it.

https://www.youtube.com/watch?v=oo_W7LpRIqY

Bright LED indicator - The LED indicator shows you the battery charge and level. It even blinks when in charge and when the battery charge is at max capacity.

Easy to Clean - The ENCHEN Blackstone 3D is super easy to clean and the head can be removed to expose the blades so that they can be cleaned as well.

Xiaomi ENCHEN Blackstone 3D Electric Shaver - Specifications

Here are the key specifications of the Xiaomi ENCHEN Blackstone 3D Electric Shaver:

Model	Blackstone 3D
Nominal Power	5W
Nominal Voltage	5V
Charging Time	60 minutes
Runtime	90 minutes
Dimensions	15 * 53 mm
Weight	139g

Xiaomi ENCHEN Blackstone 3D Electric Shaver - What’s in the Box

• 1x Xiaomi Enchen Electric Shaver Blackstone 3D
• 1x Charging cable
• 1x User Manual

Xiaomi ENCHEN Blackstone 3D Electric Shaver - Design & Build

It features a dual-tone hard plastic body that is lightweight and weighs hardly 144 grams. There’s only one button on the shaver and that’s the power button.

The whole design of the Blackstone 3D is to make sure that anyone can hold it with ease. Straight out of the box, the shaver has a hard plastic protective casing for the blades that can be removed simply by pulling it in an upward motion.

The charging port is situated under the shaver and the cutting head can be ejected with the simple press of a button on the side of the shaver.

Xiaomi ENCHEN Blackstone 3D Electric Shaver - Performance

It’s powered by a 5W electric motor and has 3 round cutting fouls that flex on their own axis. Since the blades are made from stainless steel, they tend to pull at the longer strands of hair.

The blades don’t fade or lose their sharpness quickly and unlike the single or double blade razors that need to be changed every few weeks, this set of 3 blades lasted a whopping 12 months with minimal maintenance and cleaning.

It’s a fantastic shaver, but when it comes to performance, it could have been made to perform better. There’s no alternating speeds and it’s not waterproof, so it took longer to use on thicker patches of hair and I could not use it while having a shower.

Xiaomi ENCHEN Blackstone 3D Electric Shaver - Battery Backup

In terms of battery backup it’s pretty sufficient depending on what you want to shave and how much there is to shave.

A single full charge lasts up to an hour and is more than enough for a quick trim on the go. But since there are other shavers that can go on for 2-3 hours at a stretch, Xiaomi could have either improved the battery capacity or provided it with fast charging capabilities.

For the complete review, head here: Xiaomi Enchen Blackstone 3 Review | Is The Blackstone 3 Worth It in 2023?

Pros an Cons of the Xiaomi ENCHEN Blackstone 3D Electric Shaver

Pros

• Durable build and sleek design
• Efficient and can cut even thick hair with ease
• Comes with a USB-C charging port
• Equipped with 3 foil cutters that are self sharpening

Cons

• Not waterproof
• Lacks fast charging capabilities
• Could have used a better battery
• Does not have alternating speeds

How to Set Up and Use a Xiaomi Enchen Blackstone 3 FAQs

Also Read:

• How do you use MI bedside Lamp 2
• Is Mi Body Composition Scale 2 Accurate?